siron-fire-protection-virotec-flexhose-vx-p

Flexhose VX-P

VIROTEC®-Flexhose VX-P, simple, quick, flexible.

The VIROTEC®-Flexhose is an inherently stable and non collapsible corrugated hose with wire braiding on its exterior, retaining its form even under pressure.

DOWNLOAD PDF

It is manufactured out of stainless steel with a welded straight reducer fitting (2) and an XPress press connection fitting and be supplied in lengths (0.7 m, 1.0 m, 1.2 m, 1.5 m, 1.8 m and 2.0 m) and in nominal sizes 3/4” (20 NB) and 1” (25 NB). The VIROTEC®-Flexhose VX-P is VdS approved only in conjunction with the press system type XPress from VSH. 

The VIROTEC®-Flexhose VX-P is the more consistent implementation in conjunction with the XPress press system for sprinkler systems. By using VIROTEC®-Flexhose VX-P for instance, in intermediate ceilings in very compact locations, sprinklers will be easily and fast positioned and connected whereby time will be saved and thereby costs. The VIROTEC®-Flexhose VX-P is highly easily to install because of the magnitude scaling on the straight reducer fitting (2). By that fast way of accurately vertical positioning of the reducer fitting you save additional installation time.

Function

For connecting the Flexhose to the supply line (branch line) is an XPress press fitting (1) with a diameter of 22 mm (20 NB) or 28 mm (25 NB), on its one end. At the other end, there is a welded straight redu cer fitting (2) with internal threads Rp 1/2” for mounting the sprink ler head. The reducer fittings have an uniform exterior diameter of 27 mm, which serves as fixing shank for fastening on to the brackets, Type VX-SH-…, VX-GH-…, VX-UH-…, VXAH-…. There is a hexagon with wrench size 27 mm for holding up while screwing in and aligning the sprinkler head.

Technical Data

  • - Material: Stainless steel;
    - Temperature of use: - 20 to 110 deg. C;
    - Working pressure: PN 16 (16 bar);
    - Threads: Pipe threads R 3/4”, R 1” and Rp 1/2” as per DIN 2999 (ISO 7-1);
    - Bending radius: VdS = 100 mm.
siron-fire-protection-virotec-flexhose-vx-g

Flexhose VX-G

VIROTEC®-Fixture VX-GH, simple, quick, flexible.

The VIROTEC®-Fixture VX-GH is designed to align and hold the VIROTEC®-Flexhoses VX-G, VX-S, VX-P on closed suspended Uprofile plasterboard ceilings. This fixture component is an important constituent of the VIROTEC®-Flexhose system for arm over installation of the sprinkler network in a time- and cost saving manner.

The VIROTEC®-Fixture VX-GH can be positioned freely on U-profile rails of the plasterboard ceiling and thus facilitates aligning the sprinkler between the profile rails of the ceiling structure quickly and accurate to the point.

DOWNLOAD PDF

Function

The VIROTEC®-Fixture VX-GH consists of the cross rod (1), two mounting clips VX-GH-clip (2) and the U-shaped hose clip VX-Uclip (3). The mounting clamps are specially designed for locking the cross rod to the load bearing profile rails of plasterboard ceiling systems e. g. Knauf/Rigips. The U-shaped hose clamp VX-Uclip serves to fasten the end of the hose or the reducer fitting of the VIROTEC®-Flexhose VX-G, VX-S or VX-P (see data sheets VX-G, VX-S, VX-P) on to the cross rod (1). The VX-U-clip is designed for a uniform diameter of 27 mm and is used in almost all types of fixtures for VIROTEC®-Flexhoses with nominal sizes 20 NB and 25 NB.

Exclusively to fasten the VIROTEC®-Flexhose VX-S with 1” drop nipple (see the data sheets 4.4.1 + 4.4.2) the VX-U-clamp with 34 mm diameter is used. As an alternative to the VX-U-clip on request VX-clamps for the VIROTEC®-Flexhoses of nominal sizes 20 NB and 25 NB are availlable

siron-fire-protection-virotec-flexhose-vx-s

Flexhose VX-S

VIROTEC®-Fixture VX-SH, simple, quick, flexible.

The VIROTEC®-Fixture VX-SH is designed to align and hold the VIROTEC®-Flexhoses VX-G, VX-S, VX-P on T-profile grid ceilings. This fixture component is an important constituent of the VIROTEC®-Flexhose system for arm over installation of the sprink ler network in a time- and cost saving manner. The VIROTEC®-Fixture VX-SH can be positioned freely on T-profile rails of the grid ceiling and thus facilitates aligning the sprink - ler at the center of the ceiling panel or at any other desired point within the grid ceiling quickly and accurate to the point.

DOWNLOAD PDF

Function

The VIROTEC®-Fixture VX-SH consists of the cross rod (1), two mounting clips VX-SH-clip (2) and the U-shaped hose clip VX-Uclip (3). The mounting clamps are specially designed for locking the cross rod to the load bearing profile rails of the Odenwald/ Richter/Armstrong/Dipling/Rigips ceiling systems. The U-shaped hose clamp VX-U-clip serves to fasten the end of the hose or the reducer fitting of the VIROTEC®-Flexhose VX-G, VX-S or VX-P (see data sheets VX-G, VX-S, VX-P) on to the cross rod (1). The VX-U-clip is designed for a uniform diameter of 27 mm and is used in almost all types of fixtures for VIROTEC®-Flexhoses with nominal sizes 20 NB and 25 NB.

Exclusively to fasten the VIROTEC®-Flexhose VX-S with 1” drop nipple (see the data sheets 4.4.1 + 4.4.2) the VX-U-clamp with 34 mm diameter is used. As an alternative to the VX-U-clip on request VX-clamps for the VIROTEC®-Flexhoses of nominal sizes 20 NB and 25 NB are available.

siron-fire-protection-virotec-fixture-vx-sh-uh-ah

Fixture VX-SH

VIROTEC®-Fixture VX-SH, simple, quick, flexible.

The VIROTEC®-Fixture VX-SH is designed to align and hold the VIROTEC®-Flexhoses VX-G, VX-S, VX-P on T-profile grid ceilings. This fixture component is an important constituent of the VIROTEC®-Flexhose system for arm over installation of the sprink ler network in a time- and cost saving manner. The VIROTEC®-Fixture VX-SH can be positioned freely on T-profile rails of the grid ceiling and thus facilitates aligning the sprink - ler at the center of the ceiling panel or at any other desired point within the grid ceiling quickly and accurate to the point.

DOWNLOAD PDF

Function

The VIROTEC®-Fixture VX-SH consists of the cross rod (1), two mounting clips VX-SH-clip (2) and the U-shaped hose clip VX-Uclip (3). The mounting clamps are specially designed for locking the cross rod to the load bearing profile rails of the Odenwald/ Richter/Armstrong/Dipling/Rigips ceiling systems. The U-shaped hose clamp VX-U-clip serves to fasten the end of the hose or the reducer fitting of the VIROTEC®-Flexhose VX-G, VX-S or VX-P (see data sheets VX-G, VX-S, VX-P) on to the cross rod (1). The VX-U-clip is designed for a uniform diameter of 27 mm and is used in almost all types of fixtures for VIROTEC®-Flexhoses with nominal sizes 20 NB and 25 NB.

Exclusively to fasten the VIROTEC®-Flexhose VX-S with 1” drop nipple (see the data sheets 4.4.1 + 4.4.2) the VX-U-clamp with 34 mm diameter is used. As an alternative to the VX-U-clip on request VX-clamps for the VIROTEC®-Flexhoses of nominal sizes 20 NB and 25 NB are available.