siron fire protection valves deluge valve ddv diaphragm deluge valve 1

Diaphragm Deluge Valve – Introducing The Reliable DDV Range

When the risk from fire to property and critical business processes is at the highest levels, ‘Water Deluge’ has an exceptional track record of effectiveness as a fire suppression system. Now Reliable’s latest FM approved fire protection valve, the ‘DDV’ sets new standards for performance, function, reliability and simplicity…

Proven technology

For decades, Water Deluge Fire Protection has been widely used to manage the risks associated with high challenge environments such as those found in the off-shore and petrochemical industries. At the heart of a Deluge system is the Control Valve, which is required to respond correctly to a detection signal or manual input, then ensure that a sufficient volume of water is promptly released to the open spray nozzles.

Innovation in design

Reliable’s latest valve, the DDV (Diaphragm Deluge Valve,) utilises a Kevlar® reinforced hemispherical rubber diaphragm to hold back water when the valve is in stand-by mode. The diaphragm has been specifically designed for a high level of endurance, coping with working pressures up to 400psi. The pioneering design of the valve and trim options bring together innovation with simplicity, the DDV provides one of the lowest hydraulic friction loss values for diaphragm type valves in the industry.
siron fire protection valves deluge valve ddv diaphragm deluge valve 2
Innovative design giving one of the lowest Hydraulic loss values in the industry.

Operation – general

Water pressure acting on the concave side of the diaphragm, forces the convex side to seal against an integral seat machined inside of the valve body. For water to flow past the Diaphragm Deluge Valve (DDV), the water pressure on the concave side of the diaphragm needs to be released either by impulse solenoid or manual pull station. This release of water pressure from the chamber allows the diaphragm to deform away from the seat, which permits the water to flow through the valve. Changing the signal to the solenoid will allow it to close, allowing the Diaphragm Deluge Valve (DDV) valve to reset and close. This action can be performed from a location far away from the physical valve, giving the DDV valve its remote reset functionality.

Operation – pressure regulating

An adjustable pilot valve on the body trim can increase or decrease pressure in the diaphragm chamber, thereby regulating the outlet pressure as required. Once set up in standby condition, the integrity of the seal can be verified by opening the upper drain valve to check for leaks.

Features and benefits

  • Water pressure is applied to the diaphragm chamber via internal ports that are integrated into the diaphragm and the cover – this simplifies trim and allows for a compact profile
  • The cover and diaphragm rubber can be removed without having to dismantle any trim for ease of service
  • Potential for ‘Pipe Hammer’ is reduced as the diaphragm unseats progressively
  • Ductile Iron with coating gives high resistance to inorganic salts, alkalis and solvents making it an ideal choice for corrosive environments.
  • Low hydraulic pressure losses can reduce pipe sizing
  • Available in all sizes from 1½” (40mm) through to 8” (200mm)
  • Working inlet pressure of up to 400psi (27.6 Bar)
  • Output pressure can be regulated to 20 – 210psi (1.4 – 14.5 Bar)
  • Vertical or Horizontal orientation without modification
  • FM Approval includes optional remote reset function
  • Manufactured in the USA

Diaphragm Deluge Valve (DDV) with specifications will soon be made available and you will find it in Deluge Valve page.


Diaphragm Deluge Valve (DDV) is now available. View now for more information.